My Store
DTF (Direct-to-film) Transfers
DTF (Direct-to-film) Transfers
Couldn't load pickup availability
**SHIRT NOT INCLUDED**
Ready to press DTF (Direct -to-film) transfers.
DTF prints are made for most materials, cotton, polyester, and denim.
You can apply DTF Prints to t-shirts, Hoodies, Hats, Shorts, pants, bags, and Jackets.
**HOW TO PRESS DTF PRINTS**
How to press: Prepare the garment: Make sure fabric is clean, dry, and free of wrinkles.
Preheat the Press: Set the press temperature range 280-325 F, adjust according to the press you have and operational instructions.
Pre-Press Garment: Press the fabric for a short time (6seconds or so) to remove any moisture or wrinkles.
Press: Apply firm pressure for recommended time. The typical pressure rang is 30-60 PSI (medium to firm).
Cool and peel: Let the fabric cool, then slowly peel away the clear film.
Repeat: If the transfer isn't fully adhered, you can try smoothing the print and pressing again.
Share

